Hubs

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

- Elite Series convertible cyclocross/gravel hubs - Available in multiple axle configurations - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Use: Front Hub - Bearing: Sealed - Drilling: 28H - Material: AL6061 - Color: Blk - Brake Type: 6B - OLD: 100mm J-Bend Spoke: - PCD-L: 58mm - PCD-R: 45mm - LTF-L: 27.65mm - LTF-R: 15.35mm - CTF-L: 22.35mm - CTF-R: 34.65mm Straight Pull Spoke: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 31.4mm - LTF-R: 19.6mm - CTF-L: 18.6mm - CTF-R: 30.4mm

Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible

Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm

- Centerlock, 11- speed compatible road hubs - Sealed bearings keep out contamination and dirt while providing a smooth rotation - Skewer included - Spacing / Axle: QR - OLD: 100mm

At the Center of It All Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design. Power To The Pedal Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. Overbuilt But Not Overkill With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance

With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading. - Weight: 313 grams

Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

- Aluminum hub - Sealed bearing - Black - 6-bolt disc brake rotor mount

- Aluminum hub body - Sealed bearings - 6-bolt disc rotor mount - 15mm thru axle - 78 x 15mm version: flush axle, no end caps

Sealed cartridge bearing High flange design w/cut outs 100mm OLD Lightweight, hollow, heat-treated axle Black, silver, or white 32 or 36-hole spoke drilling

• Aluminum hub body • Sealed bearings • 5/7-speed freewheel • 32 and 36-hole spoke drilling • Quick-release • 126mm hub spacing • Silver or black

- Aluminum hub body - Sealed bearings - 100mm OLD - 6-bolt disc rotor mount

- Aluminum hubs - Sealed bearing - Black - 6-bolt disc rotor

• Aluminum hub body • Quick release • Black or silver

• Sealed cartridge bearings • High flange design • 120mm hub spacing • Lightweight, hollow, heat-treated axle • Fix/fix hub threading • 32 and 36-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, and white

- Made start to finish in Asheville, NC - Light weight and easy to service

New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g

WHY WE MAKE THIS Originally, we made this hub to be the cornerstone of our hub product line. It was one of those product releases where we put all our hub and bearing experience into, and ended up with a hub that struck that perfect balance between weight, performance, durability and looks. Since the advent of disc brakes (and the R45D), we keep making it, because it’s still that cornerstone hub, and so many of our riders still love to rock their rim brakes on road and off. WHY YOU WANT IT The R45 front hub is lighter and more aerodynamic than most built-to-last hubs on the market. Our R45 rear hub combines a redesigned RingDrive™ system with 45 teeth for lower drag and near-instant engagement with a lightweight hub body and our legendary made-in-house bearings. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Steel Bearings - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our R45 Hub Service Tool - Available with Shiamano/Sram HG or Sram XDR driveshell - Available in 28h and 32h - Ceramic bearing upgrade available HUB SPECIFICATIONS - Axle Width: 130mm - Flange Diameter DS & NDS: 51mm - Center to Flange DS: 17mm - Center to Flange NDS: 34.3mm

• Sealed cartridge bearings • High flange design • 120mm hub spacing • Aluminum hub body • Lightweight, hollow, heat-treated axle • Fix/freewheel hub threading • 32 and 26-hole spoke drilling • Bolt-on 3/8-inch axle • Black, silver, or white

WHY WE MAKE THIS It's our job to make the best riding hubs in the industry, and 142mm x 12mm rear hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We think it's the best all-around disc hub on the market. WHY YOU WANT IT R45 Centerlock™ hubs combine a lightweight hub body, our legendary made-in-house bearings, and Centerlock compatibility. The result rolls better, lasts longer, sounds cooler, and looks way more handsome than anything else out there. On top of all that, the 45 points of simultaneous engagement in this hub improve power transfer and traction thanks to our patented RingDrive™ system. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. All Chris King rear hubs come with that signature, angry-bee sound. - Engineered, manufactured, and assembled in Portland, Oregon USA - Legendary made-in-house bearings · King Lifetime Warranty - Patented RingDrive™ system with 45 simultaneously engaged points of contact for virtually drag-free engagement - Available with Shiamano/Sram HG or Sram XDR drive shell - 142mm x 12mm thru axle rear - Easily serviceable and completely re-buildable with our R45 Hub Service Tool - Ceramic bearing upgrade available - Available in 24h, 28h, and 32h - Lockring is sold separately (PHB355) and is required for rotor installation on rear hub HUB SPECIFICATIONS: - Axle Width: 142mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 18.7mm - Center to Flange NDS: 33mm

- Forged aluminum construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc rotor compatible - 8/10-speed cassette compatibility - Quick-release - 135mm hub spacing

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

Chris King Boost 6-Bolt 148x12 rear hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost 6-Bolt hubs have heavy-duty bearing seals, and a threaded driveshell seal ring. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous-engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - Come in 28h and 32h drilling - Available with Micro Spline, HG or XD driveshell. - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our ISO Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue - Classic j-bend spoke interface - Steel cartridge bearings are durable

The Boost 6-Bolt front is specifically for "Boost" disc spacing forks with 110x15mm "Boost" axles. Using the larger diameter hubshell bearing the Boost 6-Bolt is designed to tackle rough terrain and aggressive riding such as downhill and enduro. In an evolving landscape of axle specifications, we are confident that the "Boost" disc location is here to stay. Chris King Boost 6-Bolt front hubs are designed as precision mountain tools. We use one-piece axles to provide a stiff hub with rail accurate steering, transferring every minute adjustment you make to the trail. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra low drag. Our bearings, available in steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously, with tools of equal wear to ensure perfectly matched inner and outer races. The quality and speed of our bearings is what sets us apart from the competition and they are what you will feel and notice on every single ride. As Chris King bearing tracks burnish they get faster with age and all our hubs and bearings are fully serviceable for years upon years of demanding use. - Steel Bearings - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Wide flange placement - Fits 110x15mm Boost axles - Legendary made-in-house LD bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our Universal Hub Service Tool - Responsibly lightweight - Ceramic bearing upgrade available - Available in 28, and 32 hole spoke count

WHY WE MAKE THIS Originally, we made this hub to be the cornerstone of our hub product line. It was one of those product releases where we put all our hub and bearing experience into, and ended up with a hub that struck that perfect balance between weight, performance, durability and looks. Since the advent of disc brakes (and the R45D), we keep making it, because it’s still that cornerstone hub, and so many of our riders still love to rock their rim brakes on road and off. WHY YOU WANT IT The R45 front hub is lighter and more aerodynamic than most built-to-last hubs on the market. We use a narrow hub body and low flanges to make the R45 a rock solid starting point for any fast wheel build. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. -Steel Bearings - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our R45 Hub Service Tool - Available in 28h and 32h - Ceramic bearing upgrade available HUB SPECIFICATIONS - Axle Width: 100mm - Flange Diameter DS & NDS: 39.8mm - Center to Flange DS: 34.8mm - Center to Flange NDS: 34.8mm

- Elite Series convertible road disc hubs - Available in multiple axle configurations - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - 6 bolt and Center Lock disc brake rotor options - Sealed bearings - Material: AL6061 Straight Pull Spoke/QR Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 32.75mm LTF-R: 50.05mm CTF-L: 34.9mm CTF-R: 17.6mm Straight Pull Spoke/12mm Thru-Axle: PCD-L: 35mm PCD-R: 49mm LTF-L: 36.25mm LTF-R: 53.55mm CTF-L: 34.9mm CTF-R: 17.6mm J-Bend Spoke/QR Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 32.65mm LTF-R: 48.2mm CTF-L: 35mm CTF-R: 19.45mm J-Bend Spoke/12mm Thru-Axle: PCD-L: 45mm PCD-R: 50.6mm LTF-L: 36.15mm LTF-R: 51.7mm CTF-L: 35mm CTF-R: 19.45mm

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement - Straight pull and J-bend spoke options - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 J-Bend/QR: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 32.95mm - LTF-R: 48.45mm - CTF-L: 34.7mm - CTF-R: 19.2mm J-Bend/142 x 12mm: - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 36.45mm - LTF-R: 51.95mm - CTF-L: 34.7mm - CTF-R: 19.2mm Straight Pull/QR: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 36.2mm - LTF-R: 50.1mm - CTF-L: 31.45mm - CTF-R: 17.55mm Straight Pull/142 x 12mm: - PCD-L: 51mm - PCD-R: 51mm - LTF-L: 39.7mm - LTF-R: 53.6mm - CTF-L: 31.45mm - CTF-R: 17.55mm

- Forged alloy construction - Sealed Cartridge bearings - Double contact seals - 6-bolt disc - 12x142mm rear spacing - Aluminum hub body

• Aluminum hubs • Sealed bearings • 1-speed freewheel threading • 32-hole spoke drilling • Bolt-on 3/8-inch axle • 135mm hub spacing • Black or silver

- Press fit designed to work the hub's non-drive side collar.

- Elite Series convertible MTB hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - Straight pull and J-bend spoke options - 6-bolt disc brake rotor compatible - Sealed bearings J-Bend SPECIFICATIONS - OLD: 110mm - Left Flange Diameter: 58mm - Right Flange Diameter: 45mm - Left Locknut-To-Flange: 27.05mm - Right Locknut-To-Flange: 15.05mm - Left Center-To-Flange: 27.95mm - Right Center-To-Flange: 39.95mm Straight-Pull SPECIFICATIONS - OLD: 110mm - Left Flange Diameter: 55mm - Right Flange Diameter: 55mm - Left Locknut-To-Flange: 31.5mm - Right Locknut-To-Flange: 19.5mm - Left Center-To-Flange: 23.5mm - Right Center-To-Flange: 35.5mm

- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately

SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.

- High-quality road hub with 1-piece forged and CNC machined alloy body - Sealed bearings for increased performance and contamination resistance - 7075AL machined axle Specifications: - Use: FT - Spacing / Axle: QR - Material: Alloy - Weight: 79g - Brake Type: RIM - Bearing Type: Sealed

Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way. - Unique internal arrangement with face-bearing clutch stopper - WTP Patented "Tri-Point" friction system - Hub Drilling: 32 - Cassette Body Type: Single Cog Driver - Axle Size: 14mm - Spoke Interface: J-Bend

There is a wild spirit here in the southern Appalachian mountains, from the dense rhodo and laurel forest to the rushing rivers, and fog-covered valleys. This is the same spirit that inspired the bootleggers and moonshine runners to soup up old cars and illegally run shine from the law through the dirt roads that litter this landscape. They knew these roads like the back of their hands and knew exactly how much speed they could hold in every turn, in every condition. This spirit lives in mountain bikers who call this place home. Factor 601 was designed to meet the demands of these riders. From the oversized alloy shell, EZO bearings, easy maintenance, and low friction coasting, these hubs are the perfect companion to a rip through trails you may or may not have permission to be on! Boost 28H Alloy Shell EZO Bearings Laser-cut Logo, CNC’d Flanges 6-Bolt Disc P.C.D 58 C.T.L 29 C.T.R 41 F.T.F 69.5

The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Bearing: Sealed - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm - LTF-L: 27.65mm Quick Release: - Weight: 246g - LTF-R: 24.85mm - CTF-L: 39.85mm - CTF-R: 42.65mm 15mm Thru-Axle: - Weight: 256g - LTF-R: 27.65mm - CTF-L: 47.35mm - CTF-R: 47.35mm

- Elite Series convertible fat bike hubs - Available in multiple axle configurations - Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement - J-bend spoke compatible - 6 bolt disc brake rotor compatible - Sealed bearings - Material: AL6061 - Color: Blk - Brake Type: 6B - PCD-L: 58mm - PCD-R: 58mm Quick-Release: - LTF-L: 48.65mm - LTF-R: 48.65mm - CTF-L: 36.5mm - CTF-R: 36.5mm 12mm Thru-Axle: - LTF-L: 52.15mm - LTF-R: 52.15mm - CTF-L: 46.5mm - CTF-R: 46.5mm

- Elite Series road hubs - Straight pull and J-bend spoke options - Sealed bearings Straight Pull Spoke: PCD-L: 30.3mm PCD-R: 30.3mm LTF-L: 13.1mm LTF-R: 13.1mm CTF-L: 36.9mm CTF-R: 36.9mm J-Bend Spoke: PCD-L: 31mm PCD-R: 31mm LTF-L: 10.78mm LTF-R: 10.78mm CTF-L: 39.22mm CTF-R: 39.22mm

- Elite Series road hubs - Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement - Straight pull and J-bend spoke options - Sealed bearings - Material: AL6061 - Brake Type: Rim - OLD: 130mm Straight Pull Spoke: PCD-L: 32mm PCD-R: 52.5mm LTF-L: 27.7mm LTF-R: 50.8mm CTF-L: 37.45mm CTF-R: 14.35mm J-Bend Spoke: PCD-L: 38.5mm PCD-R: 50.6mm LTF-L: 27.45mm LTF-R: 49.05mm CTF-L: 37.7mm CTF-R: 16.1mm

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!

Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.

- Singlespeed freecoaster hubs with 9-tooth driver - Sealed bearings - Use: Rear - Gears: Singlespeed w/ 9-tooth driver - Drilling: 36 - Axle: 14mm - OLD: 110mm - Bearing Type: Sealed

- Heat-treated axle for improved strength - Angled Flanges for lateral stability in wheel building - Rear hubs include a 4-pawl cassette body with 9-tooth driver - Use: Front - Drilling: 36H - Material: Alloy - Brake Type: Rim - OLD: 100mm