Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

- Grade 10 chromium steel balls
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
This kit includes all the parts required to rebuild your V2 Dropper Post. - Replacement Seal - Upper and lower bushings - Anti-rotation pins - Compatible with V2 Dropper Post ONLY.
The Puget lever kits are compatible with all of our droppers, including the Cascade, Pine, Rainier, Bachelor, and Coast. These levers use a barrel nut for securing the cable and is universal with all mechanically actuated droppers from other brands. This kit includes the lever assembly, cables, housing, and barrel nut. - 2x lever - Works on mountain bikes with all drivetrains, but is designed to play nice with front shifters
Addressing all the complaints of the competition, the SDG Tellis Dropper Seatpost shows a simple design wins out. SDG made this post easy to install, use, and service, delivering the must-have features of a dropper post without the common headaches. The smart touches are all over this post, from a keyed design that doesn't get wiggly after a week, a cable that attaches at the base, and an ultra-smooth thumb remote. - Features Trelleborg seals for increased sealing capacity to keep the grease in and everything else out - Updated IGUS Bushing decreases stiction to give smooth compression and extension - Sealed hydraulic cartridge system is easily serviceable - Multiple keyway system helps to reduce lateral movement - Feather-touch lever actuation with cable clamped at the post - Micro-adjust, 3D forged 2-bolt head with low stack height design - Internal stealth routing with cable tune adjustment - Includes left-side 1x actuator lever Material Detail: Aluminum Alloy Features: 107mm Minimum Insertion Internal Routed Infinitely Adjustable Design Fully Sealed Alloy Cage / Stainless Tip Cartridge System Durable 3D Forged Head with 7075-T6 Forged Clamp Featherlight Thumb Actuation Intelligent Keyway System Ensures Minimal Play Easy Installation – Cable Head Attaches At Base Cold Weather Approved – Tested Down To -20C 1x Lever Included with Premium Jagwire Lex Slick Housing, Stainless Cable & Hardware Saddle Rail Compatibility – 7mm (steel, chromoly, titanium), 7x9mm (oval carbon) Specs: Material: Aluminum Biking Type: Mountain Used For: Trail, All-Mountain / Enduro Warranty: 2 Years
Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 687
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Trail 4-piston stopping power offers quicker braking than 8000 series Predictable modulation allows for precise braking The ceramic pistons reduce heat build-up Finned pads further dissipate heat Clamp designed based on XTR for better bracing, I-Spec EV compatibility The pre-bled lever/caliper/hose assembly is ready to install
Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano G04S metal disc brake pads. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Ventilated steel backing plate for improved heat dispersion - Backing Plate Material: Steel - Compound: Metal
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
Shimano's Tiagra Rear Derailleur GS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-GS - Series: Tiagra - Cassette Compatibility: 10 - Maximum Sprocket: low sprocket: 34T / top sprocket: 12T (front double) / 20T low sprocket: 32T / top sprocket: 12T (front triple) - Minimum Sprocket: low sprocket: 28T / top sprocket: 11T (front double) / 20T low sprocket: 25T / top sprocket: 11T (front triple) - Maximum Front Difference: 16T (front double) / 20T (front triple) - Total Capacity: 39T (front double) / 41T (front triple)
Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 114g
Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.40
Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.50
RaceFace Crank Arm Fixing Bolts - M15
$0.79
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
$0.90
- Aheadset preload adjusting bolt
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Service parts for Fox suspension.
$1.20 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.58
KS Dropper Post Service Parts
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.59
- Model: Replacement bolt - Compatibility: Allen, M5x16
$1.79
Replacement bearing for the lower half of YST8003 #7 headset.
$1.79
Replace the top bearing in your YST8300 headset with these caged ball bearings.
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
RaceFace CINCH Bottom Bracket Spacers - For use with 30mm CINCH spindle systems
$1.99 - $2.39
- Crank dust cap - Works with most three-piece crank models
$1.99
- Chrome - Sold individually
$1.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
$1.99
- 8x1mm Allen head
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.19
- Crown Race - Size: 27.0mm
$2.19
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.19
- Type: Lock washer - Size: 1" Keyed
$2.39
- Aluminum w/lock nut - 18mm long/6mm O.D.
$2.39
- Aluminum w/lock nut and mount - Slotted mount design
$2.39
- Replacement cable anchor bolt for brakes - Includes nut and washer
$2.39
- Sunlite Cottered Pins
Page 1 of 112 Next page